The enhanced CS68 ECDIS (Electronic Chart Display and Information System) features robust, reliable, proven technology used by professionals. The CS68 is easy to install, operate and maintain and has a sleek, modern design. Main Features: , IMO type approved ECDIS navigation system , Fully integrated ‘backpack’ design combines a 19-inch 5:4 display with ECDIS processor, NMEA0183 connectivity, networking and power supply in a single unit. , Standard QWERTY keyboard and trackball comprise a simple, intuitive control scheme while allowing for fast and accurate entry of navigational data. , Easy to use and easy to learn for new users, with direct access to key functionalities, dedicated for navigation. , TrackSteer: Combined with a Simrad AP80 autopilot controller, the CS68 forms one of the most cost-effective IMO approved track steering systems on the market. Installation is simple, with minimal extra hardware required on vessels with an existing AP80 autopilot. Charts: , Dual-station PLECDIS offering type approved paperless navigation, easy to use with automatic route synchronization, and easy to install. Then an additional CS68 must be installed. , The CS68 ECDIS system is designed to operate with Jeppesen Cartography, and provides import capability for 3rd-party charts (visit pro.simrad-yachting.com for a list of supported suppliers). A range of Jeppesen licensing options are available to best suit your vessel’s purpose and regional chart requirements. , Compatible cartography with 3-minute worldwide import/update: Jeppesen ENC , JeppesenPrimar , Jeppesen Professional+ (aid for navigation, not intended for paperless navigation) , Navtor S-63 validated distribution (longer import time: 50 minutes for 100 ENC cells) , For other S-63 distributions, please verify CS68 compatibility with your cartography supplier Operational modes: The CS68 ECDIS systems have the unique capability of combining both a monitoring and a planning mode. All safety functions are continuously monitored even when route planning. ARPA radar interface: By activating the interface to an ARPA radar, moving targets and operator selected "fixed points" can be displayed. Other vessels are then shown in real time on the chart, color coded depending on possibility for collision. Planning mode: Planning of a route and the definition of waypoints is very simple using either a trackball or numeric keyboard. A pan function enables the operator to move around in the chart. To view any position in the world, the "Pan To" function can be used for viewing the chart in a specific position in Latitude, Longitude or around the vessel’s own position or a waypoint. Planned routes can be stored and recalled whenever necessary. Note: all units ship with power cables, mounting hardware, NMEA0183 terminal block, keyboard, trackball, Jeppesen eToken, Jeppesen charts on USB (additional cost to unlock, and manuals.

0,00

The enhanced CS68 ECDIS (Electronic Chart Display and Information System) features robust, reliable, proven technology used by professionals. The CS68 is easy to install, operate and maintain and has a sleek, modern design. Main Features: , IMO type approved ECDIS navigation system , The modern 24-inch, 16:9 widescreen sports 1920 x 1080-pixel ‘Full HD’ resolution, and provides a larger usable chart area than traditional displays. In a new or refitted bridge, a move to the widescreen format offers clear advantages in chart visibility and ECDIS ease-of-use. , Standard QWERTY keyboard and trackball comprise a simple, intuitive control scheme while allowing for fast and accurate entry of navigational data. , Familiar Simrad user interface for easy transition after upgrade , TrackSteer: Combined with a Simrad AP80 autopilot controller, the CS68 forms one of the most cost-effective IMO approved track steering systems on the market. Installation is simple, with minimal extra hardware required on vessels with an existing AP80 autopilot. Installation: , Installation is simple, with minimal extra hardware required on vessels with an existing AP80 autopilot. , Dual-station PLECDIS (Paperless ECDIS) is available with just a single cable linking two Simrad CS68 units, no extra hardware required. (of course an addtional CS68 must be added) , Supports radar overlay, ARPA and AIS targets for enhanced situational awareness. Charts: , Dual-station PLECDIS offering type approved paperless navigation, easy to use with automatic route synchronization, and easy to install. An addtional CS68 must be added. , The CS68 ECDIS system is designed to operate with Jeppesen Cartography, and provides import capability for 3rd-party charts (visit pro.simrad-yachting.com for a list of supported suppliers). A range of Jeppesen licensing options are available to best suit your vessel’s purpose and regional chart requirements. , Compatible cartography with 3-minute worldwide import/update: Jeppesen ENC , JeppesenPrimar , Jeppesen Professional+ (aid for navigation, not intended for paperless navigation) , Navtor S-63 validated distribution (longer import time: 50 minutes for 100 ENC cells) , For other S-63 distributions, please verify CS68 compatibility with your cartography supplier Operational modes: The CS68 ECDIS systems have the unique capability of combining both a monitoring and a planning mode. All safety functions are continuously monitored even when route planning. ARPA radar interface: By activating the interface to an ARPA radar, moving targets and operator selected "fixed points" can be displayed. Other vessels are then shown in real time on the chart, color coded depending on possibility for collision. Planning mode: Planning of a route and the definition of waypoints is very simple using either a trackball or numeric keyboard. A pan function enables the operator to move around in the chart. To view any position in the world, the "Pan To" function can be used for viewing the chart in a specific position in Latitude, Longitude or around the vessel’s own position or a waypoint. Planned routes can be stored and recalled whenever necessary. Further: , EMC/ S57, S63 and C-Map SENC CM93/3 support , Chart update online or via CD, DVD, USB flash drive , Dual monitor output , Simrad Backup Manager , Logbook with voyage playback Note: all units ship with power cables, mounting hardware, NMEA0183 terminal block, keyboard, trackball, Jeppesen eToken, Jeppesen charts on USB (additional cost to unlock, and manuals.

0,00

The enhanced CS68 ECDIS (Electronic Chart Display and Information System) features robust, reliable, proven technology used by professionals. The CS68 is easy to install, operate and maintain and has a sleek, modern design. Main Features: , IMO type approved ECDIS navigation system , Fully integrated ‘backpack’ design combines a 19-inch 5:4 display with ECDIS processor, NMEA0183 connectivity, networking and power supply in a single unit. , Standard QWERTY keyboard and trackball comprise a simple, intuitive control scheme while allowing for fast and accurate entry of navigational data. , Well-suited to retrofits: the 19-inch CS68 is built to industry standard sizing and will fit into many existing 19-inch monitor cutouts. , TrackSteer: Combined with a Simrad AP80 autopilot controller, the CS68 forms one of the most cost-effective IMO approved track steering systems on the market. Installation is simple, with minimal extra hardware required on vessels with an existing AP80 autopilot. Installation: , Installation is simple, with minimal extra hardware required on vessels with an existing AP80 autopilot. , Dual-station PLECDIS (Paperless ECDIS) is available with just a single cable linking two Simrad CS68 units, no extra hardware required. , Supports radar overlay, ARPA and AIS targets for enhanced situational awareness. Charts: , Dual-station PLECDIS offering type approved paperless navigation, easy to use with automatic route synchronization, and easy to install. , The CS68 ECDIS system is designed to operate with Jeppesen Cartography, and provides import capability for 3rd-party charts (visit pro.simrad-yachting.com for a list of supported suppliers). A range of Jeppesen licensing options are available to best suit your vessel’s purpose and regional chart requirements. , Compatible cartography with 3-minute worldwide import/update: Jeppesen ENC , JeppesenPrimar , Jeppesen Professional+ (aid for navigation, not intended for paperless navigation) , Navtor S-63 validated distribution (longer import time: 50 minutes for 100 ENC cells) , For other S-63 distributions, please verify CS68 compatibility with your cartography supplier Further: , EMC/ S57, S63 and C-Map SENC CM93/3 support , Chart update online or via CD, DVD, USB flash drive , Dual monitor output , Simrad Backup Manager , Logbook with voyage playback Note: all units ship with power cables, mounting hardware, NMEA0183 terminal block, keyboard, trackball, Jeppesen eToken, Jeppesen charts on USB (additional cost to unlock, and manuals.

0,00

The enhanced CS68 ECDIS (Electronic Chart Display and Information System) features robust, reliable, proven technology used by professionals. The CS68 is easy to install, operate and maintain and has a sleek, modern design. Main Features: , IMO type approved ECDIS navigation system , Fully integrated ‘backpack’ design combines a 24-inch widescreen 16:9 display with ECDIS processor, NMEA0183 connectivity, networking and power supply in a single unit. , The modern 24-inch, 16:9 widescreen sports 1920 x 1080-pixel ‘Full HD’ resolution, and provides a larger usable chart area than traditional displays. In a new or refitted bridge, a move to the widescreen format offers clear advantages in chart visibility and ECDIS ease-of-use. , Standard QWERTY keyboard and trackball comprise a simple, intuitive control scheme while allowing for fast and accurate entry of navigational data. , TrackSteer: Combined with a Simrad AP80 autopilot controller, the CS68 forms one of the most cost-effective IMO approved track steering systems on the market. Installation is simple, with minimal extra hardware required on vessels with an existing AP80 autopilot. Installation: , Installation is simple, with minimal extra hardware required on vessels with an existing AP80 autopilot. , Dual-station PLECDIS (Paperless ECDIS) is available with just a single cable linking two Simrad CS68 units, no extra hardware required. , Supports radar overlay, ARPA and AIS targets for enhanced situational awareness. Charts: , Dual-station PLECDIS offering type approved paperless navigation, easy to use with automatic route synchronization, and easy to install. , The CS68 ECDIS system is designed to operate with Jeppesen Cartography, and provides import capability for 3rd-party charts (visit pro.simrad-yachting.com for a list of supported suppliers). A range of Jeppesen licensing options are available to best suit your vessel’s purpose and regional chart requirements. , Compatible cartography with 3-minute worldwide import/update: Jeppesen ENC , JeppesenPrimar , Jeppesen Professional+ (aid for navigation, not intended for paperless navigation) , Navtor S-63 validated distribution (longer import time: 50 minutes for 100 ENC cells) , For other S-63 distributions, please verify CS68 compatibility with your cartography supplier Further: , EMC/ S57, S63 and C-Map SENC CM93/3 support , Chart update online or via CD, DVD, USB flash drive , Dual monitor output , Simrad Backup Manager , Logbook with voyage playback Note: all units ship with power cables, mounting hardware, NMEA0183 terminal block, keyboard, trackball, Jeppesen eToken, Jeppesen charts on USB (additional cost to unlock, and manuals.

0,00

E5024 Introduction E5024 brings the latest user interface, LCD monitor and Quad core processor technology into the ECDIS market providing the customer the highest performance and most cost effective ECDIS solution available today. E5024 is perfectly suited for smaller fishing vessels through to larger passenger vessels and super yachts. E5024 offers an extremely powerful yet easy-to-use user interface that meets all of the IMO requirements, providing the user with a fully featured yet easy to learn ECDIS system. E5024 Features Type approved ECDIS navigation system to meet IMO standards All new user interface software provides clean and crisp data presentation and ease of use UKHO(AVCS, PRIMAR, IC-ENC and NOAA ENC support AIO, Admiralty information overlay Simrad Argus radar overlay Navtor chart support for SENC and S-63 and S-57 charts S52 and INT1 Chart Presentation PLECDIS (Dual ECDIS) connection option to enable ‘paperless’ navigation Integrated second display port output providing additional MFD functionality at a second station. Echo sounder, Charting, Radar, CCTV, Instrument panels etc. 24” 16:9 widescreen for larger viewable chart area 24V DC operation System pack includes ECDIS Display, ECDIS processor, Trackball and cabling

0,00